Fluke 113 600v AC/DC True RMS Digital Multimeter

£132.00£158.40 incl. TAX
£110.00£132.00 excl. TAX

  • VCHEKโ„ข LoZ low impedance measurement function to test for either AC or DC voltage, or show continuity if voltage is not detected.
  • Large backlit display
  • CAT IV 600 V safety rated

2 in stock

Product Code: FLU113 SKU: 500-1048 Category:
Description
VCHEK1 2 3 Range 6.000 V / 60.00 V / 600.0 V
Resolution 0.001 V / 0.01 V/ 0.1 V
Accuracy DC, 45 to 500 Hz: 2.0% + 3
500 Hz to 1 kHz: 4.0% + 3
Diode test4 Range 2.000 V
Resolution 0.001 V
Accuracy 2.0% + 3
Continuity4 Accuracy Beeper on < 20 ฮฉ, off > 250 ฮฉ detects opens or shorts of 500 ฮผs or longer
ฮฉ4 Range 600.0 ฮฉ / 6.000 kฮฉ / 60.00 kฮฉ
Resolution 0.1 ฮฉ / 0.001 kฮฉ / 0.01 kฮฉ
Accuracy 0.9% + 2 / 0.9% + 1 / 0.9% + 1
Capacitance4 Range 1000 nF / 10.00 ฮผF / 100.0 ฮผF / 9999 ฮผF
Resolution 1 nF / 0.01 ฮผF / 0.1 ฮผF / 1 ฮผF
Accuracy 1.9% + 2
100 ฮผF – 1000 ฮผF: 1.9% + 2
1000 ฮผF: 5% + 20
1. All VChek voltage ranges are specified from 60 counts to 100% of range. Because inputs below 60 counts are not specified, it is possible and normal for this and other true-rms meters to display non-zero readings when the test leads are disconnected from a circuit or are shorted together.
2. Crest factor of โ‰ค 3 at 4000 counts, decreasing linearly to 1.5 at full scale.
3. Minimum measureable input in VCHEK autorange is 3 VDC. For measurements below 3 VDC, push Range button twice to get to 6 VDC manual range.
4. After measuring voltage, a wait time of 1 minute is required to maintain accuracy of ohms, capacitance, diode test, and continuity.
Specifications
Maximum voltage between any terminal and earth ground 600 V
Display 3 3/4-digits, 6000 counts, updates 4/sec
Operating temperature -10ยฐC to 50ยฐC (14ยฐF to 122ยฐF)
Storage temperature -40ยฐC to 60ยฐC (-22ยฐF to 140ยฐF)
Temperature coefficient 0.1 x (specified accuracy) / ยฐC (< 18ยฐC or > 28ยฐC)
Operating altitude 2,000 m
Storage altitude 10,000 m
Relative humidity 95% to 30ยฐC
75% to 40ยฐC
45% to 50ยฐC
Battery type 9 Volt Alkaline, IEC 6F22
Battery life Alkaline: 300 hours typical, without backlight
Size (H x W x L) 167.1 x 85.1 x 46.0 mm (6.58 x 3.35 x 1.81 in)
Weight 13.0 oz (404 g)
Safety IEC 61010-1: Pollution Degree 2
IEC 61010-2-033: CAT IV 600V
EMI regulations Complies with FCC Part 15, Class B
Specifications
VCHEK Input impedance (nominal) ~3 kฮฉ < 300 pF
VCHEK Common mode rejection ratio
(1 kฮฉ unbalanced)
> 60 dB at DC, 50 or 60 Hz
ฮฉ Open circuit test voltage < 2.7 VDC
Full scale voltage < 0.7 VDC
Diode test Open circuit test voltage 2.7 VDC
Full scale voltage 2.000 VDC
ฮฉ Short circuit current < 350 ฮผA
Diode test Short circuit current < 1.0 mA
Additional information
Brand

Fluke

Shipping & Delivery